X55 + Phase One P3 Setup Guide
  • X55 + Phase One P3 Guide
  • X55 + Phase One P3 Setup Overview
    • High Level Workflow
    • Hardware Setup
    • Herelink Setup and X55 Configuration (Single Operator)
    • Dual Operator Mode Setup
    • Common Camera Settings
    • How to Change Camera Settings
    • How to Control the Gimbal and Camera
    • Planning an Automated Mission
    • Connecting the Camera to iX Capture
    • Getting Images from the Camera
    • A Basic Photogrammetry Workflow
    • Power On and Off
    • Disassembly and Storage
    • Camera Sensor Information
Powered by GitBook
On this page
  • Power On:
  • Power Off:
  1. X55 + Phase One P3 Setup Overview

Power On and Off

Power On:

When hooked up properly, the gimbal will automatically boot up and do a self test when the drone is powered on. The power for the gimbal comes directly from the power to the drone.

Power Off:

The gimbal will be powered down when the drone is powered down.

PreviousA Basic Photogrammetry WorkflowNextDisassembly and Storage

Last updated 1 year ago