X55 + Phase One P3 Setup Guide
  • X55 + Phase One P3 Guide
  • X55 + Phase One P3 Setup Overview
    • High Level Workflow
    • Hardware Setup
    • Herelink Setup and X55 Configuration (Single Operator)
    • Dual Operator Mode Setup
    • Common Camera Settings
    • How to Change Camera Settings
    • How to Control the Gimbal and Camera
    • Planning an Automated Mission
    • Connecting the Camera to iX Capture
    • Getting Images from the Camera
    • A Basic Photogrammetry Workflow
    • Power On and Off
    • Disassembly and Storage
    • Camera Sensor Information
Powered by GitBook
On this page
  1. X55 + Phase One P3 Setup Overview

Getting Images from the Camera

PreviousConnecting the Camera to iX CaptureNextA Basic Photogrammetry Workflow

Last updated 1 year ago

With the system powered down, carefully remove the CF Express card from the camera. Use a CF Express card reader and connect to a computer where you have iX Capture installed.

Copy the images from the CF Express card to a suitable location on your computer.

Open iX Capture and go to the “PROCESSES” tab. The minimum steps you need to take in order to convert IIQ files to JPG are the following.

1 = enter a recipe name and make sure you select the folder where you want the exported photos to go.

2 = select the RGB photo option.

3 = select directories or images that you want to process into JPG

4 = Click “START PROCESSES”.

These photos will be converted and saved as JPG images.

If you open the properties of one of these JPG photos, you can see all of the metadata that is captured with the image, such as the camera characteristics and the GPS coordinates of the image.